What Do You Hook The WAN Port Up To?

How do I use the WAN port on my wireless router?

Follow these steps, regardless of what the router’s included setup guide might say:Connect the router’s WAN port to your internet source, such as a DSL or cable modem, using the first network cable.

Connect one of the router’s LAN ports (most routers have four LAN ports) to the computer using the second network cable.More items…•.

Can I plug an Ethernet cable into the wall outlet?

For a wired internet connection you can probably not use a cable directly to that socket. … Your wall socket is probably not connected to a router or a modem. If you want to use it, find the cable that goes into it an plug it into your modem’s Ethernet port. The wall socket is not actually a magic Internet source.

How do I find my WAN port?

Web Site ToolsOpen your Web browser. Go to the ShowMyIPAddress, WhatIsMyIP or MyWANIP website (see Resources).View your WAN IP on the page when it opens. … Record your address. … Open your Web browser. … Find the WAN IP in the router’s configuration. … Record the WAN address.

Is Wan faster than LAN?

LAN, which stands for local area network, and WAN, which stands for wide area network, are two types of networks that allow for interconnectivity between computers. … LANs are typically faster and more secure than WANs, but WANs enable more widespread connectivity.

What is the difference between WAN and LAN?

A LAN (local area network) is a group of computers and network devices connected together, usually within the same building. … A WAN connects several LANs, and may be limited to an enterprise (a corporation or an organization) or accessible to the public. The technology is high speed and relatively expensive.

How much area does Wan cover?

While a WAN, which operates similarly to a MAN, can span the globe, a MAN is only capable of spanning an area between 5 to 50 kilometers in range.

Why is wan light flashing?

If the WAN light is continually flashing, this indicates that your modem is not seeing the network in order to connect. The fact that you can view the modems interface (http://10.0.0.138) means that your computer is able to communicate with the modem.

Do I plug into WAN or LAN?

Use the LAN ports on your wireless router to connect devices on your home network, such as computers or printers. Connect the WAN port to your modem or another device hooked up to the public internet.

How do I setup a WAN connection?

Power on your router and computer first and then modem.Log into the router’s web-based management page. … Configure WAN Connection Type. … Enter your PPPoE username and password which are provided by your ISP.Click Save to save your settings, then the router will connect to Internet after a while.More items…•

How do I connect WAN port to DSL?

Connect the DSL modem to the Internet port / WAN port of the router and the computer to any of the available ports at the back of the router. After connecting the devices together, check the lights on the front panel of the router. Make sure that the ports where the Ethernet cable are connected to are lit.

What does Wan mean on a router?

Wide Area NetworkA Wide Area Network (WAN) is a network that exists over a large-scale geographical area. Your modem sends and receives information to and from the internet through its WAN port.

Why is WAN better than LAN?

LAN has a higher data transfer rate whereas WAN has a lower data transfer rate. LAN is a computer network that covers a small geographic area, like a home, office, or group of buildings, while WAN is a computer network that covers a broader area. The speed of LAN is high whereas the speed of WAN is slower than LAN.

What do you plug into a WAN port?

A WAN port is used to connect to an internet source, such as a broadband modem. The WAN allows the router to connect to the internet and share that connection with all the Ethernet-ready devices connected to it.

How do I fix WAN port?

To troubleshoot your WAN or LAN port:Plug in the power adapter of your router to the power outlet.Turn on the router and wait for the power LED to become solid green or white. … Take one Ethernet cable, and connect one end to any of the router’s LAN port, and the other end to the router’s WAN port.Check the LEDs.

Do I need a WAN connection?

The WAN port on your router is the uplink to the Internet. It is used to connect to your modem which in turn allows you to connect to the Internet. Unless you access the Internet via a telephone link, without a WAN connection there will be no Internet connectivity.

Can I use the WAN port for LAN?

Computers should not be connected to a router’s WAN port, as this would prevent data from entering or exiting the network. Instead, a computer should be connected to a router’s local area network (LAN) port, as these ports are specifically intended to handle local network traffic.

What are the advantages of LAN and WAN?

Due to it’s typically massive size, WAN’s are almost always slower then a LAN. The further the distance, the slower the network. One of the big disadvantages to having a WAN is the cost it can incur. Having a private WAN can be expensive….AdvantagesDisadvantagesSpeed Cost Ease of SetupLimited to Small Area

What should my WAN connection type be?

Other Broadband Modem. If you use a non-DSL modem, such as cable, wireless, or satellite, to connect to your Internet service provider, your WAN type is probably Dynamic IP Address. You may be able to determine your WAN type by inspecting the IP properties on your computer.